musiktheorietheorie/musixtex/doc/musixdoc/miscellaneous.tex

1096 lines
37 KiB
TeX
Raw Normal View History

2022-03-27 12:09:14 +02:00
\chapter{Miscellaneous Other Notations}
%avre
\section{Metronomic indications}
%Metronomic indication deserves a special macro. The mention:
%
%\medskip
%\centerline{\def\nbinstruments{0}\metron{\hup}{60}}
%
%\smallskip\noindent
%is coded by \keyindex{metron}\verb|{\hup}{60}| (normally embedded in
%\keyindex{Uptext} which is in turn embedded within \verb|\notes...\en|).
%
% On the other hand, music writers sometimes want to specify that the duration
%of a previous note is equal to a distinct furthernote. Thus
%
% \smallskip
%\centerline{\def\nbinstruments{0}\metronequiv{\qup}{\qu}}
%
%\smallskip\noindent
%is coded by \keyindex{metronequiv}\verb|{\qup}{\qu}|.
By way of example, the notations
\begin{quote}
\def\nbinstruments{0}
\metron{\qu}{60}
\quad and\quad
\def\nbinstruments{0}\metronequiv{\qup}{\qu}
\end{quote}
are
respectively coded as
\keyindex{metron}\verb|{\qu}{60}| and \keyindex{metronequiv}\verb|{\qup}{\qu}|,
which are normally placed using \keyindex{Uptext}.
Also, you can set a smaller metronomic indication like
\begin{quote}
\def\nbinstruments{0}\metron{\smallnotesize\lqu}{ca.~72}
\quad or \quad
\def\nbinstruments{0}\metron{\tinynotesize\lqu}{ca.~72}
\end{quote}
by writing
\begin{quote}
\verb|\metron{\smallnotesize\lqu}{ca.~72}|
\end{quote}
or
\begin{quote}
\verb|\metron{\tinynotesize\lqu}{ca.~72}|
\end{quote}
\section{Accents}
You may use\footnote{Note from the editor: the reason the names of some of
these macros don't seem to suggest the terms used in the
descriptions is that apparently Daniel Taupin had in mind other terms,
such as \emph{pizzicato}.}
\begin{itemize}\setlength{\itemsep}{0ex}
\item \keyindex{upz}\pitchp~(upper \itxem{staccato}) to put a dot above a note
head at pitch $p$,
\item \keyindex{lpz}\pitchp~(lower \ital{staccato}) to put a dot below a note
head at pitch $p$,
\item \keyindex{usf}\pitchp~(upper \itxem{sforzando}) to put a $>$ accent above
a note head at pitch $p$,
\item \keyindex{lsf}\pitchp~(lower \itxem{sforzando}) to put a $>$ accent below
a note head at pitch $p$,
\item \keyindex{ust}\pitchp~(upper \itxem{tenuto}) to put a
hyphen above a note head at pitch $p$,
\item \keyindex{lst}\pitchp~(lower \ital{tenuto}) to put a
hyphen below a note head at pitch $p$,
\item \keyindex{uppz}\pitchp~(upper \itxem{staccatissimo}) to put a solid vertical
wedge above a note head at pitch $p$,
\item \keyindex{lppz}\pitchp~(lower \ital{staccatissimo}) to put an inverted
solid vertical wedge below a note head at pitch $p$,
\item \keyindex{usfz}\pitchp~(upper \itxem{forzato}) to put a
``dunce cap'' above a note head at pitch $p$,
\item \keyindex{lsfz}\pitchp~(lower \ital{forzato}) to put an inverted
``dunce cap'' below a note head at pitch $p$,
\item \keyindex{upzst}\pitchp~(upper \itxem{mezzo-staccato/portato}) to put a
dot and a hyphen above a note head at pitch $p$,
\item \keyindex{lpzst}\pitchp~(lower \ital{mezzo-staccato/portato}) to put a
dot and a hyphen below a note head at pitch $p$,
\item \keyindex{flageolett}\pitchp~to put a
small circle above a note head at pitch $p$.
\end{itemize}
These marks are horizontally centered relative to solid note heads.
To
compensate for the fact that whole notes are wider, you may use
\begin{quote}
\keyindex{wholeshift}\verb|{|\ital{Any nonspacing macro}\verb|}|
\end{quote}
to center accents
(and other items) above or below a whole note. For example,
\keyindex{Fermataup}\pitchp~(described in Section~{\ref{ornaments}}) is
\emph{defined} as \keyindex{wholeshift}\verb|{|\keyindex{fermataup}\pitchp\verb|}|.
There are also variants of the most common accents\footnote{Thanks to Klaus
{\sc Bechert}'s corrections.} which will be automatically positioned
above or below a beam. They are spelled like the corresponding normal
accent, but preceded with the letter \verb|b|, and their argument, instead of
the pitch, is the beam reference number . Thus
\medskip
\begin{music}\nostartrule
\startextract
\Notes\ibu0f3\busfz0\qb0f\bupz0\qb0g\bust0\qb0h%
\buppz0\qb0i\busf0\qb0j\butext0\tqh0k\en
\Notes\Ibl0lg5\blsfz0\qb0l\blpz0\qb0k\blst0\qb0j%
\blppz0\qb0i\blsf0\qb0h\bltext0\tqb0g\en
\zendextract
\end{music}
\noindent was coded as
\begin{quote}\begin{verbatim} \startextract
\Notes\ibu0f3\busfz0\qb0f\bupz0\qb0g\bust0\qb0h%
\buppz0\qb0i\busf0\qb0j\butext0\tqh0k\en
\Notes\Ibl0lg5\blsfz0\qb0l\blpz0\qb0k\blst0\qb0j%
\blppz0\qb0i\blsf0\qb0h\bltext0\tqb0g\en
\zendextract
\end{verbatim}\end{quote}
\zkeyindex{busfz}
\zkeyindex{bupz}
\zkeyindex{bust}
\zkeyindex{buppz}
\zkeyindex{busf}
\zkeyindex{butext}
\zkeyindex{blsfz}
\zkeyindex{blpz}
\zkeyindex{blst}
\zkeyindex{blppz}
\zkeyindex{blsf}
\zkeyindex{bltext}
The macros \verb|\bltext| and \verb|\butext| are detailed in the next section,
where the mystery of why they produce the number~$3$ is resolved.
\section{Numbers and brackets for xtuplets}\label{tuplet}
The following table lists all the special macros that place a number indicating
an xtuplet. Some also place a bracket above or below the notes, and are
intended for use with unbeamed notes.
In the table, $p$ is a pitch, $k$ is a number, $n$ is a beam number,
$w$ is a bracket width in \verb|\internote|s, and $s$ is the bracket slope as
a multiple of $1.125$~degrees. The macro \verb|\txt| contains a default number
which will be placed by the first and third through sixth macros,
and is initially defined as \verb|\def\txt{3}|.
The macro
\verb|\tuplettxt| serves the same role for the last two macros.
The font used is defined by
\verb|\txtfont| and is, by default, \verb|\eightit| (in normal music size) but may be re-defined.
\zkeyindex{txtfont}
The first four commands in the table
are normally used with beamed xtuplets. As indicated in the
last column, the last four produce a sloping bracket and may be used with
unbeamed xtuplets.
\begin{center}
\begin{tabular}{lclcc}
\hline
~ & Number & ~ & Needs & ~ \\
Macro and arguments & printed & Where invoked & Bracket \\
\hline
\verb|\triolet|\pitchp & \verb|\txt| & before beam & none \\
\verb|\xtuplet|\itbrace{k}\pitchp & $k$ & before beam & none \\
\verb|\butext|\itbrace{n} & \verb|\txt| & before note at number & none \\
\verb|\bltext|\itbrace{n} & \verb|\txt| & before note at number & none \\
\verb|\uptrio|\pitchp\itbrace{w}\itbrace{s} & \verb|\txt| & before first note & solid \\
\verb|\downtrio|\pitchp\itbrace{w}\itbrace{s} & \verb|\txt| & before first note & solid \\
\verb|\uptuplet|\pitchp\itbrace{w}\itbrace{s} & \verb|\tuplettxt| & before first note & with gap \\
\verb|\downtuplet|\pitchp\itbrace{w}\itbrace{s} & \verb|\tuplettxt| & before first note & with gap \\
\hline
\end{tabular}
\end{center}
\medskip
Here are some examples of the first six macros in the table:\\
\vskip-3pt
\begin{music}
\parindent0mm
\generalmeter{\meterfrac24}
\nostartrule
\startpiece
\addspace\afterruleskip
\notesp\xtuplet6n\isluru0l\ibl0l0\qb0{lllll}\tslur0l\tqb0l\en\bar
\notesp\triolet n\isluru0l\Ibl0ln2\qb0{lm}\tslur0n\tqb0n\en
\notesp\ibslurd0k\Ibl0km2\qb0k\bltext0\qb0l\tdbslur0m\tqb0m\en\bar
\Notesp\triolet o\isluru0l\ql{lm}\tslur0n\ql n\en\bar
\Notesp\uptrio o16\ql l\en\notesp\cl n\en
%avrb
\Notesp\downtrio O16\qu e\en\notesp\cu g\en
%avre
\endpiece
\end{music}
whose coding is
\begin{quote}\begin{verbatim}
\notesp\xtuplet6n\isluru0l\ibl0l0\qb0{lllll}\tslur0l\tqb0l\en\bar
\notesp\triolet n\isluru0l\Ibl0ln2\qb0{lm}\tslur0n\tqb0n\en
\notesp\ibslurd0k\Ibl0km2\qb0k\bltext0\qb0l\tdbslur0m\tqb0m\en\bar
\Notesp\triolet o\isluru0l\ql{lm}\tslur0n\ql n\en\bar
\Notesp\uptrio o16\ql l\en\notesp\cl n\en
\Notesp\downtrio O16\qu e\en\notesp\cu g\en
\end{verbatim}\end{quote}
\zkeyindex{xtuplet}\zkeyindex{triolet}
\medskip
Next are examples using \keyindex{uptuplet} and \keyindex{downtuplet}.
A re-definition of \verb|\tuplettxt| inside a notes group only applies
inside that group and leaves the default definition intact.
To get the
number properly centered in the gap, you must include some extra space after
the number in the definition of \verb|\tuplettxt|. As you can see in
the last bar, if the span becomes too small, the macros still won't provide
enough room for the number in the gap; in this case it would be better to
use the macros without gaps.
% Examples:
%
% Draw a triplet bracket over the notes, starting at pitch "p",
% 1.25\noteskip wide, with a slope up of 3-3/8 degrees:
%
% \uptuplet p{1.25}3
%
% Draw a sextuplet bracket under the notes, starting at pitch "a",
% 2.5\noteskip wide, with a slope down of 4-1/2 degrees:
%
% \def\tuplettxt{\smallppff 6\/\/}
% \downtuplet{a}{2.5}{-4}
\begin{music}
%\input tuplet
\parindent0mm
\generalmeter{\meterfrac24}
%\startpiece
\nostartrule
\startextract
\addspace\afterruleskip
\notesp\triolet o\Ibl0ln2\qb0{lm}\tqb0n\en
\notesp\Ibl0km2\qb0k\bltext0\qb0l\tqb0m\en\bar
\notesp\def\tuplettxt{5\/\/}\uptuplet o{4.1}2\cl{jklmn}\en\bar
\Notesp\uptuplet o16\ql l\en\notesp\cl n\en
\Notesp\downtuplet O16\qu e\en\notesp\cu g\en\bar
\notesp\uptuplet o16\ccl l\en\notesp\cccl n\en
\notesp\downtuplet O16\ccu e\en\notesp\cccu g\en
%\endpiece
\endextract
\end{music}
\noindent with coding
\begin{quote}\begin{verbatim}
\parindent0mm
\generalmeter{\meterfrac24}
\startextract
\addspace\afterruleskip
\notesp\triolet o\Ibl0ln2\qb0{lm}\tqb0n\en
\notesp\Ibl0km2\qb0k\bltext0\qb0l\tqb0m\en\bar
\notesp\def\tuplettxt{5\/\/}\uptuplet o{4.1}2\cl{jklmn}\en\bar
\Notesp\uptuplet o16\ql l\en\notesp\cl n\en
\Notesp\downtuplet O16\qu e\en\notesp\cu g\en\bar
\notesp\uptuplet o16\ccl l\en\notesp\cccl n\en
\notesp\downtuplet O16\ccu e\en\notesp\cccu g\en
\end{verbatim}\end{quote}
A modern notation uses a \emph{ratio} such as $5$:$6$ to specify the intended duration
of an x-tuplet. This is supported in \musixtex\ by the command
\keyindex{xxtuplet}, as in
\begin{music}
\nostartrule
\startextract\addspace\afterruleskip
\notes\xxtuplet5:6o\ibl0j3\qb0{jklm}\tql0n\en
\endextract
\end{music}
\noindent with coding \verb|\xxtuplet5:6o\ibl0j3\qb0{jklm}\tql0n|. For the
other x-tuplet commands (apart from \verb|\triolet|, which is defined in terms of \verb|\xtuplet|),
it is possible to define \verb|\txt| or
\verb|\tupletxt| as a ratio, as in
\begin{quote}\begin{verbatim}
\def\txt{5:6}
\end{verbatim}\end{quote}
\section{Ornaments}
\label{ornaments}
\subsection{Simple ornaments}\index{ornaments}
The argument $p$ in the following macros for ordinary ornaments is the
pitch at which the ornament itself appears. They are all nonspacing macros.
You may use
\begin{itemize}\setlength{\itemsep}{0ex}
\item \keyindex{mordent}\pitchp\ for \hbox to .75em{\mordent 0\hss}
\item \keyindex{Mordent}\pitchp\ for \hbox to 1.5em{\kern 0.6em\Mordent 0\hss}
\item \keyindex{shake}\pitchp\ for \hbox to .75em{\shake 0\hss}
\item \keyindex{Shake}\pitchp\ for \hbox to 1.5em{\kern 0.6em\Shake 0\hss}
\item \keyindex{Shakel}\pitchp\ for \hbox to 1.5em{\kern 0.6em\Shakel 0\hss}
\item \keyindex{Shakesw}\pitchp\ for \hbox to 1.5em{\kern 0.6em\Shakesw 0\hss}
\item \keyindex{Shakene}\pitchp\ for \hbox to 1.5em{\kern 0.6em\Shakene 0\hss}
\item \keyindex{Shakenw}\pitchp\ for \hbox to 1.5em{\kern 0.6em\Shakenw 0\hss}
\item \keyindex{turn}\pitchp\ for \hbox to 1.5em{\kern 0.6em\turn 0\hss}
\item \keyindex{backturn}\pitchp\ for \hbox to 1.5em{\kern 0.6em\backturn 0\hss}
\item \keyindex{tr}\pitchp\ for \hbox to 1.5em{\kern 0.6em\tr 0\hss}
\item \keyindex{trt}\pitchp\ for \hbox to 1.5em{\kern 0.6em\trt 0\hss}\quad (J. S.~Bach's \textit{trillo und mordant})
\item \keyindex{xtr}\pitchp\ for \hbox to 1.5em{\kern 0.5em\xtr 0\hss}
\item \keyindex{ptr}\pitchp\ for \hbox to 1.5em{\kern 0.5em\ptr 0\hss}
\end{itemize}
To
compensate for the fact that whole notes are wider, you may use
\begin{quote}
\keyindex{wholeshift}\verb|{|\mbox{\ital{Any nonspacing macro}}\verb|}|
\end{quote}
to center any of these ornaments
above (or below) a whole note.
In the following macros for fermatas, the argument $p$ is the pitch of the
notehead on which the fermata rests, assuming no additional vertical
adjustments are needed for stems or intervening staff lines. They are all
nonspacing macros. You may use
\begin{itemize}\setlength{\itemsep}{0ex}
\item \keyindex{fermataup}\pitchp\ for
\raisebox{0ex}[0ex][0ex]{\notesintext{\notes\fermataup1\en}},
\end{itemize}
\begin{itemize}\setlength{\itemsep}{3ex}
\item \keyindex{fermatadown}\pitchp\ for
\raisebox{0ex}[0ex][0ex]{\notesintext{\notes\fermatadown2\en}},
\item \keyindex{Fermataup}\pitchp\ for
\raisebox{-1ex}[-1ex][0ex]{\musicintextnoclef{\notes\Fermataup 7\zwh{'c}\en}}~,
centered over a whole note,
\item \keyindex{Fermatadown}\pitchp\ for
\raisebox{-1ex}[0ex][0ex]{\musicintextnoclef{\notes\Fermatadown1\zwh{'c}\en}}~,
centered under a whole note.
\end{itemize}
\bigskip
A \itxem{breath} mark
\raisebox{-5ex}[0ex][0ex]{\notesintext{\notes\zbreath\en}}
can be put just above the staff with \keyindex{zbreath}. This is a nonspacing
macro. On the other hand, \keyindex{cbreath} will cause a space of one
\verb|\noteskip| and place the comma midway through the space.
The \keyindex{caesura} command inserts a slash \verb|0.5\noteskip| before
the place it is entered, while adding no space:
\begin{music}\nostartrule
\startextract
\NOTes\zhu j\hl{^e}\caesura\en
\Notes\zcu j\cl e\en
\zendextract
\end{music}
\subsection{Arpeggios}
\ital{Arpeggios} (i.e.~~~\arpeggio{-2}3) can be coded with the macro
\keyindex{arpeggio}\pitchp\itbrace{m}
where $p$ is the pitch of
the base of the arpeggio symbol and $m$ is its height in units of
\verb|\interligne|, the distance from one staff line to the next. It should be
issued before the affected chord. It is
automatically positioned to the left of the chord, but inserts no spacing.
Its variant \keyindex{larpeggio} sets the arpeggio symbol roughly
one note head width to the left of the default position, and is intended to
avoid collision with single accidentals on chord notes.
\subsection{Arbitrary length trills}
There are two styles of arbitrary length trills\index{trills}, each with two
variants.
For a trill with preassigned length, use \keyindex{trille}\pitchp\itbrace{l}
for \hbox to 1cm{\noteskip1cm\trille11\hss} or
\keyindex{Trille}\pitchp\itbrace{l} for~~\hbox to
2cm{\noteskip1cm\Trille12\hss}, where $p$ is the pitch and $l$ the length in
current \verb|\noteskips|.
To let \musixtex\ compute the length of the trill, or if it extends across a
system break, you can use \keyindex{Itrille}$n$\pitchp\ to start a plain
trill, where $n$ is a trill reference number between 0 and 5; then
\keyindex{Ttrille}$n$ to terminate it. To get the {\it tr} at the
beginning, use \keyindex{ITrille}$n$\pitchp\ to start the trill and
\verb|\Ttrille|$n$ to close it.
\begin{sloppypar}
As with other elements, you can specify the maximum number
directly with \keyindex{setmaxtrills}\verb|{|$m$\verb|}|, where $7<m\leq 100$%
\footnote{This may require e-\TeX.};
the reference number $n$ will be in the range between $0$ and $m-1$.
\label{musixmad_setmaxtrills}
\end{sloppypar}
For example:
\medskip
\begin{music}
\instrumentnumber{1}
\setstaffs12
\setclef1{6000}
%
\startextract
\notes\qu{CDEFGH}|\hu k\sk\ITrille 1p\itenu1l\wh l\en
\bar
\notes\Itrille 2A\itenu2E\whp E|\tten1\hlp l\sk\Ttrille 1\qu {mno}\en
\bar
\Notes\tten2\itenu2E\whp E|\ql{nmlkji}\en
\bar
\Notes\tten2\whp E\sk\sk\sk\sk\Ttrille2|\qu{hgfedc}\en
\endextract
\end{music}
whose coding is
\begin{quote}\begin{verbatim}
\begin{music}\nostartrule
\instrumentnumber{1}
\setstaffs12
\setclef1{6000}
%
\startextract
\notes\qu{CDEFGH}|\hu k\sk\ITrille 1p\itenu1l\wh l\en
\bar
\notes\Itrille 2A\itenu1e\whp E|\tten1\hlp l\sk\Ttrille 1\qu {mno}\en
\bar
\Notes\tten1\itenu1E\whp E|\ql{nmlkji}\Toctfin1\en
\bar
\Notes\tten1\whp E\sk\sk\sk\sk\Ttrille2|\qu{hgfedc}\en
\endextract
\end{verbatim}\end{quote}
\subsection{Tremolos}\label{tremolos}
The command \keyindex{trml}\verb|{|$p$\verb|}|~is used to indicate that the immediately
following
quarter or half note (normally at pitch $p$ and with a lower stem) is to be repeated in eighth notes.
For example,
\verb|\trml j\ha j|
generates
\begin{music}\nostartrule
\startextract
\NOTes\trml j\ha j\en
\zendextract
\end{music}\noindent
and is an abbreviation for
\begin{music}\nostartrule
\startextract
\notes\ibl0j0\qb0{jjj}\tql0j\en
\zendextract
\end{music}\noindent
Similarly, \keyindex{trmu}\verb|{|$p$\verb|}|~generates an eighth-note tremolo
on a quarter or half note with an \emph{upper} stem:
\begin{music}\nostartrule
\startextract
\NOTes\trmu h\ha h\en
\zendextract
\end{music}\noindent
16th-note and 32-note tremolos are similarly generated by
commands \keyindex{trrml}, \keyindex{trrmu}, \keyindex{trrrml}
and \keyindex{trrrmu}, as in
\begin{music}
\nostartrule
\startextract
\NOtesp\trrml h\zqlp h\trrmu j\qup j\en
\Notes\stemlength{6.4}\trrml j\zcl j\trrmu l\cu l\en
\NOtes\stemlength{6.4}\trrrml h\zql h\trrrmu j\qu j\en
\endextract
\end{music}\noindent
which is coded as
\begin{quote}\begin{verbatim}
\NOtesp\trrml h\zqlp h\trrmu j\qup j\en
\Notes\stemlength{6.4}\trrml j\zcl j\trrmu l\cu l\en
\NOtes\stemlength{6.4}\trrrml h\zql h\trrrmu j\qu j\en
\end{verbatim}\end{quote}
The \keyindex{stemlength} command is used to adjust
stem lengths;
the new length remains effective to the end of the current notes group.
If necessary, the usual stem length can be restored by using
\verb|\stemlength{\DefaultStemlength}|.
For \emph{whole} notes, tremolo indications
should be wider and centered directly over or under the note. These
are generated by commands \keyindex{Trml}, \keyindex{Trmu}, \keyindex{Trrml},
\keyindex{Trrmu}, \keyindex{Trrrml} and \keyindex{Trrrmu}; for example,
\begin{music}
\nostartrule
\startextract
\NOTEs\Trml h\zw h\Trmu j\wh j\en
\bar%
\NOTEs\Trrml h\zw h\Trrmu j\wh j\en
\bar%
\NOTEs\Trrrml h\zw h\Trrrmu j\wh j\en
\endextract
\end{music}\noindent
which is coded as
\begin{quote}\begin{verbatim}
\NOTEs\Trml h\zw h\Trmu j\wh j\en\bar
\NOTEs\Trrml h\zw h\Trrmu j\wh j\en\bar
\NOTEs\Trrrml h\zw h\Trrrmu j\wh j\en
\end{verbatim}\end{quote}
For all of the commands described in this section, the pitch parameter may be used
if it is necessary to raise or lower the tremolo indication.
%however, note values
%must be alphabetic and not numeric,
%because transposition is used to adjust the vertical position of the mini-beams.
\section{Piano pedal commands}
The macro \keyindex{PED} inserts a piano-pedal command below the staff;
\keyindex{DEP}, a pedal release. Alternate symbols, the first of which
occupies less space, are invoked with \keyindex{sPED} and \keyindex{sDEP}.
For example,
\begin{music}
\setclef1\bass
\setstaffs1{2}
\startextract
\NOtes\PED\wh J|\qu h\en
\NOtes|\qu g\en
\NOtes|\hu k\en
\Notes\DEP\en
\bar
\NOtes\sPED\wh J|\qu h\en
\NOtes|\qu g\en
\NOtes|\hu k\en
\Notes\sDEP\en
\endextract
\end{music}
\noindent was coded as \begin{quote}\begin{verbatim}
\NOtes\PED\wh J|\qu h\en
\NOtes|\qu g\en
\NOtes|\hu k\en
\Notes\DEP\en \bar
\NOtes\sPED\wh J|\qu h\en
\NOtes|\qu g\en
\NOtes|\hu k\en
\Notes\sDEP\en
\end{verbatim}\end{quote}
The vertical position of
\keyindex{PED}, \keyindex{sPED}, \keyindex{DEP} and \keyindex{sDEP} can be
globally changed by redefining its elevation, which has the default
definition \verb|\def|\keyindex{raiseped}\verb|{-5}|.
To locally change the vertical position of a pedal symbol, use one of the more
fundamental
macros \keyindex{Ped}, \keyindex{sPed}, \keyindex{Dep} and \keyindex{sDep}
in combination with \keyindex{zchar} or \keyindex{zcharnote}.
Since the \hbox to .7cm{ \Ped\hss} symbol is rather wide, it might collide
with adjacent bass notes. To shift it horizontally, you could use \verb|\loff{\PED}|.
The following excerpt from \textit{Liebestr\"aume} by Franz Liszt illustrates
a more modern approach to specifying piano-pedal usage:
\begin{music}
\smallmusicsize
\relativeaccid
\parindent=0pt
\generalmeter{\meterfrac64}\generalsignature{-4}
\nobarnumbers
\setstaffs12\setclef1{\bass}
\def\raiseped{-11}
\def\qpl{\raise-2\Interligne\qp}
\def\qpu{\raise2\Interligne\qp}
\def\hppl{\lifthpausep{-2}}
\startpiece\addspace\afterruleskip%
\NOtes\zqu L\qpl|\qp\en
\bar%
\Notes\loff{\pdld}\ql H\sk\qpl\sk\qpl|%
\zhl{.c}\ds\ibu1i0\qb1{ehjh}\tqu1e\en
\Notes\zhu{.c}\hppl|%
\ds\ibu1i0\qb1{ehjh}\tqu1e\en
\bar%
\Notes\pdlud\ql G\sk\qpl\sk\qpl|%
\itied1c\zhl{.c}\ds\ibu1i0\qb1{^eiji}\tqu1e\en
\Notes\hppl\sk\sk\sk\qu c|%
\ttie1\zhl{c}\ds\ibu1i0\qb1{eiji}\tqu1e\en
\stoppiece%
\def\raiseped{-15}
\contpiece%%
\Notes\pdlud\ql F\sk\qpl\sk\zqu c\qpl|%
\zhl{c}\ds\ibu1i0\qb1{=e^hjh}\tqu1e\en
\Notes\hppl\sk\sk\sk\qu c|%
\zhl{d}\ds\ibu1i0\qb1{ehjh}\tqu1e\en
\bar%
\Notes\pdlud\ql B\sk\qpl\sk\qpl|%
\zhl{.c}\ds\ibu1i0\qb1{^d^hjh}\tqu1d\en
\Notes\zqu{M}\hppl\sk\sk\qpu\sk\qu M|%
\ds\ibu1i0\qb1{dhjh}\tqu1d\en
\bar%
\Notes\zmidstaff{$\cdots$}\sk\pdlu\sk|\en
\endpiece%
\end{music}
\vspace*{2ex}\par\noindent
This has been coded using the following commands:
\begin{quote}
\begin{tabular}{lll}
\keyindex{pdld}& pedal down & \huge$\llcorner$\\
\keyindex{pdlu}& pedal up & \huge$\lrcorner$\\
\keyindex{pdlud} & pedal up and immediately down & \_\raisebox{2pt}{$\!\bigwedge\!$}\_
\end{tabular}
\end{quote}
The elevation is determined by the value of \keyindex{raiseped}.
Here is how the excerpt may be coded:
\begin{quote}
\begin{footnotesize}
\begin{verbatim}
\smallmusicsize\relativeaccid\nobarnumbers
\generalmeter{\meterfrac64}
\generalsignature{-4}
\setstaffs12\setclef1{\bass}
\def\raiseped{-11}
\def\qpl{\raise-2\Interligne\qp}
\def\qpu{\raise2\Interligne\qp}
\def\hppl{\lifthpausep{-2}}
\startpiece\addspace\afterruleskip%
\NOtes\zqu L\qpl|\qp\en
\bar%
\Notes\loff{\pdld}\ql H\sk\qpl\sk\qpl|%
\zhl{.c}\ds\ibu1i0\qb1{ehjh}\tqu1e\en
\Notes\zhu{.c}\hppl|%
\ds\ibu1i0\qb1{ehjh}\tqu1e\en
\bar%
\Notes\pdlud\ql G\sk\qpl\sk\qpl|%
\itied1c\zhl{.c}\ds\ibu1i0\qb1{^eiji}\tqu1e\en
\Notes\hppl\sk\sk\sk\qu c|%
\tltie1\zhl{c}\ds\ibu1i0\qb1{eiji}\tqu1e\en
\stoppiece%
\def\raiseped{-15}
\contpiece%
\Notes\pdlud\ql F\sk\qpl\sk\zqu c\qpl|%
\zhl{.c}\ds\ibu1i0\qb1{=e^hjh}\tqu1e\en
\Notes\hppl\sk\sk\sk\qu c|%
\zhl{d}\ds\ibu1i0\qb1{ehjh}\tqu1e\en
\bar%
\Notes\pdlud\ql B\sk\qpl\sk\qpl|%
\zhl{c}\ds\ibu1i0\qb1{^d^hjh}\tqu1d\en
\Notes\zqu{M}\hppl\sk\sk\qpu\sk\qu M|%
\ds\ibu1i0\qb1{dhjh}\tqu1d\en
\bar%
\Notes\zmidstaff{$\cdots$}\sk\pdlu\sk|\en
\endpiece
\end{verbatim}
\end{footnotesize}
\end{quote}
\pagebreak
\noindent
The following ``mixed'' patterns are also supported:
\begin{quote}
\begin{verbatim}
\PED ... [\pdlud].. ... \pdlu
\sPED ... [\pdlud].. ... \pdlu
\end{verbatim}
\end{quote}
\section{Alphabetic dynamic marks}
Conventional dynamic symbols
\pppp, \ppp, \pp,
\p,
\mezzopiano,
\mf,
\f,
\fp,
\sF,
\ff,
\fff,
\ffff,
\sfz\ and
\sfzp\ can be posted using the macros
\keyindex{pppp},
\keyindex{ppp},
\keyindex{pp},
\keyindex{p},
\keyindex{mp},
\keyindex{mf},
\keyindex{f},
\keyindex{fp},
\keyindex{sF},
\keyindex{ff},
\keyindex{fff},
\keyindex{ffff},
\keyindex{sfz} and
\keyindex{sfzp}, respectively, as the second argument of \verb|\zcn| (\verb|\zcharnote|) or
\verb|\ccn| (\verb|\ccharnote|).
See also Section~\ref{musixppff} for an alternative set of dynamic marks.
\section{Length of note stems}
The default length of note stems is the distance of one octave, i.e.,~\verb|7\internote| or \texttt{4.66}\keyindex{interbeam}. The default may be changed
with the macro \keyindex{stemlength}\itbrace{b}\ where $b$ is the length in
\verb|\interbeam|s.
The command \keyindex{stemcut} causes stems that extend outside the staff
to be shortened depending on the pitch of the notes. It is the default
behavior. To suppress this adjustment, issue the command
\keyindex{nostemcut}.
Normally, down stems never end above the middle line of the staff and up stems
never below that line. The command \keyindex{stdstemfalse} will inhibit this
adjustment, but only for the next stem generated. There is no command to globally
suppress this behavior.
\section{Brackets, parentheses, oblique lines and slides}\label{brapar}
Several varieties of brackets\index{brackets}, parentheses\index{parentheses} and oblique lines\index{oblique lines} are provided for
use within a score.
\begin{itemize}\setlength{\itemsep}{0ex}
\item \keyindex{lpar}\verb|{|$p$\verb|}| and
\keyindex{rpar}\verb|{|$p$\verb|}| yield left and right
parentheses at pitch $p$. They can be used to enclose notes or to build
``big'' cautionary\index{cautionary accidental} accidentals. For example,
\\
\begin{center}
\begin{tabular}{ll}
\raisebox{-1.5ex}[0ex][0ex]{\musicintextnoclefn{\NOtes\qsk\lpar g\rpar g\hu g\sk%
\loffset{1.5}{\lpar g\rpar g}\loffset{.4}{\sh g}\hu g\sk%
\loffset{2.1}{\lpar g}\loffset{1.5}{\rpar g}\loffset{.4}{\dfl g}\hu g\en}}
\end{tabular}
\end{center}
is coded as
\end{itemize}
\begin{center}\small
\begin{tabular}{l}
\verb+\NOtes\lpar g\rpar g\hu g\sk%+\\
\verb+\loffset{1.5}{\lpar g\rpar g}\loffset{.4}{\sh g}\hu g\sk%+\\
\verb+\loffset{2.1}{\lpar g}\loffset{1.5}{\rpar g}\loffset{.4}{\dfl g}\hu g\en+
\end{tabular}
\end{center}
\begin{itemize}
\item \keyindex{bracket}\verb|{|$p$\verb|}{|$n$\verb|}| posts a
square bracket to the left of a chord, vertically spanning $n$
\verb|internote|s.
\item \keyindex{doublethumb}\verb|{|$p$\verb|}| indicates a bracket as
above spanning 2\verb|\internote|s.
\item \keyindex{ovbkt}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}| and
\keyindex{unbkt}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}|
draw a sloped bracket starting at the current position at pitch $p$,
with horizontal extent $n$ \verb|noteskip|s and slope $s$ in multiples of
$1.125$~degrees.
\item \keyindex{uptrio}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}| and
\keyindex{downtrio}\verb|{|$p$\verb|}{|$n$\verb|}{|$s$\verb|}| are like
\verb|\ovbkt| but with freely definable \keyindex{txt} centered inside.
\item \keyindex{varline}\itbrace{h}\itbrace{\ell}\itbrace{s}\ builds an
oblique line starting at the current horizontal position. It must be used
inside a zero-width box, such as for example as the second argument of
\verb|\zcharnote|. $h$ is the height of the starting point, $\ell$ is the
length, and $s$ is the slope. It is used in the definitions of some of
the foregoing macros, and could be used, for example, to construct various
obscure baroque ornaments made up of diagonal lines.
\item \keyindex{slide}\itbrace{p}\itbrace{x}\itbrace{s}~ provides a \emph{glissando}
starting at pitch {\it p} and extending for {\it x} \verb|\internote|s with
slope {\it s} (ranging from $-8$ to $8$).
\end{itemize}
For example,
\begin{music}
\setstaffs1{2}
\setclef1\bass
\startextract
\NOtes\bracket C8\zq C\qu J\en
\NOtes|\doublethumb g\rq h\qu g\en
\NOtes\lpar c\rpar c\qu c\en
\NOtes\unbkt C15\qu {FH}|\ovbkt n14\ql{kl}\en
\NOtes\downtrio C16\qu {FH}|\uptrio o14\ql{lm}\en
\NOtesp\roffset{1.5}{\slide J33}\ca{JM}|\roffset{1.5}{\slide j33}\ca{jm}\en
\endextract
\end{music}
\noindent is coded as
\begin{quote}\small\begin{verbatim}
\begin{music}
\setstaffs1{2}
\setclef1{\bass}
\startextract
\NOtes\bracket C8\zq C\qu J\en
\NOtes|\doublethumb g\rq h\qu g\en
\NOtes\lpar c\rpar c\qu c\en
\NOtes\unbkt C15\qu {FH}|\ovbkt n14\ql{kl}\en
\NOtes\downtrio C16\qu {FH}|\uptrio o14\ql{lm}\en
\NOtesp\roffset{1.5}{\slide J33}\ca{JM}|\roffset{1.5}{\slide j33}\ca{jm}\en
\zendextract
\end{music}
\end{verbatim}\end{quote}
\section{Forcing activity at the beginning of systems}
A macro named \keyindex{everystaff} is executed each time a new system
begins. It is normally void, but it can be defined (simply by \verb|\def|%
\keyindex{everystaff}\verb|{...}|) to cause \musixtex\ to post anything
reasonable at the beginning of each system. For it to affect the first system
in a score, it must be defined \ital{before}
\verb|\startpiece|.
If a macro named \keyindex{atnextline} is defined at any point in a score,
it will be executed just once, viz., at the next computed or forced system
break. More
precisely, it is executed after the break and before the next system begins.
Thus it is suitable for redefining layout parameters.
\index{octave treble clef}In some scores, tenor parts are not coded using the
\ital{bass} clef, but using rather the \ital{octave treble clef}, which is
subscripted by a numeral {\tt8}.
This clef is supported by the clef substitution command
\keyindex{settrebleclefsymbol}\onen\keyindex{treblelowoct}, as already
explained in Section~\ref{treblelowoct}. However, if for some reason you
aren't happy with the height of the ``8'', it can be posted on selected
staves at the beginning of every system using \keyindex{everystaff} and
\keyindex{zcharnote} as follows:
\begin{music}
\instrumentnumber{4}\setclef1\bass
\def\everystaff{\znotes&\zchar{-6}{\eightrm\kern-2\Interligne8}%
&\zchar{-6}{\eightrm\kern-2\Interligne8}\en}%
\startextract
\NOTes\ha{HIJK}&\ha{efgh}&\ha{hijk}&\ha{hmlk}\en
\zendextract
\end{music}
\noindent
The coding is
\begin{quote}\begin{verbatim}
\instrumentnumber{4}\setclef1\bass
\def\everystaff{\znotes&\zchar{-6}{\eightrm \kern -2\Interligne 8}%
&\zchar{-6}{\eightrm \kern -2\Interligne 8}\en}%
\startextract
\NOTes\ha{HIJK}&\ha{efgh}&\ha{hijk}&\ha{hmlk}\en
\endextract
\end{verbatim}\end{quote}
\section{Tablature}\label{tablature}\index{tablature}
Tablature is a notational system used for fretted stringed instruments such
as lute, guitar, banjo, mandolin, and so on. Staff lines represent strings
and conventional note heads are replaced by numbers (or sometimes letters)
indicating which fret is to be stopped, with $0$ representing an open string.
A special clef symbol
\keyindex{tabclef} may be used with \verb|\setclefsymbol| for a tablature staff; commands \verb|\setlines|, \verb|\setsign|,
\verb|\setsize| and \verb|\setname| may be used as usual for a tablature staff.
A size-dependent font \keyindex{tabstringfnt} can be used for string names.
The macros that put numbers (or letters) on staff lines
are as follows:
\begin{itemize}
\item \keyindex{tab}\verb|{|$n$\verb|}|\verb|{|$p$\verb|}|
puts $p$ on string $n$
(counting from top to bottom); $p$ is centered, using \verb|\ccharnote|.
Space for a ``rest'' can be generated by a command like
\verb|\qa{*}|.
Ledger lines are replaced by slashes (/) for $n$ greater than the number of staff lines,
or simply the number of courses below the staff if this is greater than 3.
\item \keyindex{ltab}\verb|{|$n$\verb|}|\verb|{|$p$\verb|}|
uses \verb|\zcharnote| so $p$
spills to the right and
\keyindex{rtab}\verb|{|$n$\verb|}|\verb|{|$p$\verb|}|
uses \verb|\lcharnote| so $p$
spills to the left.
\item \keyindex{ztab}\verb|{|$n$\verb|}|\verb|{|$p$\verb|}|
is a non-spacing \verb|\tab|, and can be used for building chords.
\item \keyindex{zltab}\verb|{|$n$\verb|}|\verb|{|$p$\verb|}|
is a non-spacing \verb|\ltab| and
\keyindex{zrtab}\verb|{|$n$\verb|}|\verb|{|$p$\verb|}|
is a non-spacing \verb|\rtab|.
\end{itemize}
A size-dependent font \keyindex{tabfnt} is used for tab characters. Helvetica bold is the
default font family but the traditional script letters of French tablature may be obtained by
inputting the extension library \verb|musixftab.tex|\index{musixftab@{\tt musixftab.tex}}
described in Section~\ref{frenchtab}.
The default tablature style is to place fingering notations \emph{on} staff lines;
Postscript specials are used to ``blank'' staff lines below
the tab characters.
Here is an example
for baroque lute
(from \emph{Ciaccona} in D~minor by J.S.~Bach):
\begin{music}
\input musixps
\def\psslurhgt{0.5}
\instrumentnumber{2}
\songbottom1\songtop2
\generalmeter{\meterfrac34}
\interinstrument=5\internote
\nobarnumbers
\setlines16\setclefsymbol1\tabclef\setsize1{1.2}\setsign10
\setsign2{-1}\setclefsymbol2\treblelowoct
\parindent=2ex
\setname1{\tabstringfnt\baselineskip=1.2\internote%
\vbox{\hbox{F}\hbox{D}\hbox{A}\hbox{F}\hbox{D}\hbox{A}}}
\startextract
\scale{0.8}
\NOtes\qa{*}&\qp\en
\NOtesp\zltab50\zltab40\ltab30&\zhl{d}\zhu{f}\qu{.h}\en
\Notes\ltab30&\cu{h}\en
\bar%
\NOtes\zltab50\zltab42\zltab31\ltab22&\zql d\zqu g\zq i\qu l\en
\NOtesp\zltab64\zltab55\zltab30\ltab22&\rhl{^c}\rhu{g}\zh{h}\qu{.l}\en
\Notes\ltab22&\cu{l}\en
\bar%
\NOtes\zltab50\zltab40\zltab30\ltab10&\zql d\zq f\zq h\qu{m}\en
\NOtes\zltab61\zltab40\ltab20&\zhl b\zh f\qu{.k}\en
\Notes\ltab33&\cu j\en
\bar%
\NOtes\zltab70\zltab55\ltab45&\zql N\zq g\qu i\en
\NOtes\zltab60\zltab53\ltab44&\zql a\zq f\qu h\en
\notes\zltab64\ltab42\ilsluru03\ltab53\ltab52\tlslur03\ltab53%
&\zql{^c}\ibbu0g{-1}\qb0g\slur eed2\qb0{fe}\tqu0f\en
\bar%
\notes\ztab{10}0\ltab42\ilsluru03\ltab52\ltab53\tlslur03\ltab50%
&\zql K\ibbu0g{-1}\qb0g\slur edd2\qb0e\qb0f\tqu0d\en
\NOtesp\zltab50\zltab40\ltab30&\zhl{d}\zhu{f}\qu{.h}\en
\Notes\ltab30&\cu{h}\en
\bar%
\zendextract
\end{music}
\noindent
The coding is
\begin{footnotesize}
\begin{quote}\begin{verbatim}
\instrumentnumber{2}
\songbottom1\songtop2
\generalmeter{\meterfrac34}
\interinstrument=4\internote
\nobarnumbers
\setlines16\setclefsymbol1\tabclef\setsize1{1.2}\setsign10
\setsign2{-1}\setclefsymbol2\treblelowoct
\parindent=2ex
\setname1{\tabstringfnt\baselineskip=1.2\internote%
\vbox{\hbox{F}\hbox{D}\hbox{A}\hbox{F}\hbox{D}\hbox{A}}}
\startextract
\NOtes\qa{*}&\qp\en
\NOtesp\zltab50\zltab40\ltab30&\zhl{d}\zhu{f}\qu{.h}\en
\Notes\ltab30&\cu{h}\en
\bar%
\NOtes\zltab50\zltab42\zltab31\ltab22&\zql d\zqu g\zq i\qu l\en
\NOtesp\zltab64\zltab55\zltab30\ltab22&\rhl{^c}\rhu{g}\zh{h}\qu{.l}\en
\Notes\ltab22&\cu{l}\en
\bar%
\NOtes\zltab50\zltab40\zltab30\ltab10&\zql d\zq f\zq h\qu{m}\en
\NOtes\zltab61\zltab40\ltab20&\zhl b\zh f\qu{.k}\en
\Notes\ltab33&\cu j\en
\bar%
\NOtes\zltab70\zltab55\ltab45&\zql N\zq g\qu i\en
\NOtes\zltab60\zltab53\ltab44&\zql a\zq f\qu h\en
\notes\zltab64\ltab42\ilsluru03\ltab53\ltab52\tlslur03\ltab53%
&\zql{^c}\ibbu0g{-1}\qb0g\slur eed2\qb0{fe}\tqu0f\en
\bar%
\notes\ztab{10}0\ltab42\ilsluru03\ltab52\ltab53\tlslur03\ltab50%
&\zql K\ibbu0g{-1}\qb0g\slur edd2\qb0e\qb0f\tqu0d\en
\NOtesp\zltab50\zltab40\ltab30&\zhl{d}\zhu{f}\qu{.h}\en
\Notes\ltab30&\cu{h}\en
\bar\zendextract
\end{verbatim}\end{quote}
\end{footnotesize}
\clearpage
\par\noindent
If it is desired that fingering notations be placed \emph{above} staff lines, use
the command \keyindex{tabstylespacetrue}.
Here is the same example with \verb|\tabstylespacetrue|:
\begin{music}
\input musixps
\def\psslurhgt{0.5}
\tabstylespacetrue
\instrumentnumber{2}
\songbottom1\songtop2
\generalmeter{\meterfrac34}
\interinstrument=4\internote
\nobarnumbers
\setlines16\setclefsymbol1\tabclef\setsize1{1.2}\setsign10
\setsign2{-1}\setclefsymbol2\treblelowoct
\parindent=2ex
\setname1{\tabstringfnt\baselineskip=1.2\internote%
\vbox{\hbox{F}\hbox{D}\hbox{A}\hbox{F}\hbox{D}\hbox{A}}}
\startextract
\scale{0.8}
\NOtes\qa{*}&\qp\en
\NOtesp\zltab50\zltab40\ltab30&\zhl{d}\zhu{f}\qu{.h}\en
\Notes\ltab30&\cu{h}\en
\bar%
\NOtes\zltab50\zltab42\zltab31\ltab22&\zql d\zqu g\zq i\qu l\en
\NOtesp\zltab64\zltab55\zltab30\ltab22&\rhl{^c}\rhu{g}\zh{h}\qu{.l}\en
\Notes\ltab22&\cu{l}\en
\bar%
\NOtes\zltab50\zltab40\zltab30\ltab10&\zql d\zq f\zq h\qu{m}\en
\NOtes\zltab61\zltab40\ltab20&\zhl b\zh f\qu{.k}\en
\Notes\ltab33&\cu j\en
\bar%
\NOtes\zltab70\zltab55\ltab45&\zql N\zq g\qu i\en
\NOtes\zltab60\zltab53\ltab44&\zql a\zq f\qu h\en
\notes\zltab64\ltab42\ilsluru03\ltab53\ltab52\tlslur03\ltab53%
&\zql{^c}\ibbu0g{-1}\qb0g\slur eed2\qb0{fe}\tqu0f\en
\bar%
\notes\ztab{10}0\ltab42\ilsluru03\ltab52\ltab53\tlslur03\ltab50%
&\zql K\ibbu0g{-1}\qb0g\slur edd2\qb0e\qb0f\tqu0d\en
\NOtesp\zltab50\zltab40\ltab30&\zhl{d}\zhu{f}\qu{.h}\en
\Notes\ltab30&\cu{h}\en
\bar%
\zendextract
\end{music}
\medskip
\noindent
In pure tablature, note durations can be specified by tiny notes
above the staff, as in:
\medskip
\begin{music}
\input musixps
\def\psslurhgt{0.5}
\instrumentnumber{1}
\generalmeter{\meterfrac34}
\generalsignature{-1}
\setlines16\setclefsymbol1\tabclef\setsize1{1.2}\setsign10
\nobarnumbers
\parindent=2ex
\setname1{\tabstringfnt\baselineskip=1.2\internote%
\vbox{\hbox{F}\hbox{D}\hbox{A}\hbox{F}\hbox{D}\hbox{A}}}
\nostartrule
\startextract
\scale{0.8}
\NOtes\tzqu\qa{*}\en
\NOtesp\zltab50\zltab40\tzqup\ltab30\en
\Notes\tzcu\ltab30\en
\bar%
\NOtes\zltab50\zltab42\zltab31\tzqu\ltab22\en
\NOtesp\zltab64\zltab35\zltab30\tzqup\ltab22\en
\Notes\tzcu\ltab22\en
\bar%
\NOtes\zltab50\zltab30\zltab20\tzqu\ltab10\en
\NOtes\zltab61\zltab40\tzqup\ltab20\en
\Notes\tzcu\ltab33\en
\bar%
\NOtes\zltab70\zltab55\tzqu\ltab45\en
\NOtes\zltab60\zltab53\ltab44\en
\notes\zltab64\tzccu\ltab42\ilsluru03\ltab53\ltab52\tlslur03\ltab53\en
\bar%
\notes\ztab{10}0\tzccu\ltab42\ilsluru03\ltab52\ltab53\tlslur03\ltab50\en
\NOtesp\zltab50\zltab40\tzqup\ltab30\en
\Notes\tzcu\ltab30\en
\bar%
\zendextract
\end{music}
\medskip
\noindent
\smallskip
\noindent
A tiny note can be generated above the staff using one of the commands
\keyindex{tzwh}, \keyindex{tzwhp}, \keyindex{tzhu}, \keyindex{tzhup}, \keyindex{tzqu}, \keyindex{tzqup}, \keyindex{tzcu}, \keyindex{tzcup}, \keyindex{tzccu}, \ldots\
\emph{before} a spacing command. These commands suppress spurious ledger lines and
avoid raising dots on dotted notes.
\smallskip
\noindent
Coding
for the notes in the example above is as follows:
\begin{footnotesize}
\begin{quote}\begin{verbatim}
\startextract
\NOtes\tzqu\qa{*}\en
\NOtesp\zltab50\zltab40\tzqup\ltab30\en
\Notes\tzcu\ltab30\en
\bar%
\NOtes\zltab50\zltab42\zltab31\tzqu\ltab22\en
\NOtesp\zltab64\zltab35\zltab30\tzqup\ltab22\en
\Notes\tzcu\ltab22\en
\bar%
\NOtes\zltab50\zltab30\zltab20\tzqu\ltab10\en
\NOtes\zltab61\zltab40\tzqup\ltab20\en
\Notes\tzcu\ltab33\en
\bar%
\NOtes\zltab70\zltab55\tzqu\ltab45\en
\NOtes\zltab60\zltab53\ltab44\en
\notes\zltab64\tzccu\ltab42\ilsluru03\ltab53\ltab52\tlslur03\ltab53\en
\bar%
\notes\ztab{10}0\tzccu\ltab42\ilsluru03\ltab52\ltab53\tlslur03\ltab50\en
\NOtesp\zltab50\zltab40\tzqup\ltab30\en
\Notes\tzcu\ltab30\en
\bar%
\zendextract
\end{verbatim}\end{quote}
\end{footnotesize}
\medskip
Tablature support in \musixtex\ has been adapted
from \verb|tabdefs.tex| by R.J.~Gelten, which is available
\href{http://icking-music-archive.org/software/musixtex/add-ons/tabdefs.tex}
{\underline{here}}
at WIMA\index{WIMA}.